Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
19
Note:
Ø If you use the NVR with the PoE network ports, the online state of the internal Ethernet port
will be shown on the interface. Refer to the picture below. Please refer to 13.1.1 TCP/IP
Configuration for detail introduction of the internal Ethernet port.
Ø If the NVR has two network ports or above, you can select the network work pattern as
required. Network Fault Tolerance and Multiple Address Setting are available. Refer to the
pictures below. Please refer to 13.1.1 TCP/IP Configuration for more detailed information.
VITEK Industrial Video Products
–
Transcendent Series NVRs
20
⑥ Add Camera. Click “Refresh” to refresh the list of online IP cameras which are in the same
local network with NVR and then click to add the searched camera. Click “Add All” to
add all the cameras in the list. Click to delete the added camera. Click “Delete All” to
delete all the added cameras.