Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
23
Upgrade for details.
3.2 Main Interface
3.2.1 Main Interface Introduction
The buttons in area ① are introduced in the table below.
VITEK Industrial Video Products
–
Transcendent Series NVRs
24
Button Meaning
Start button. Click it to pop up area ③.
Full screen button. Click it to show full screen; click it again to exit the full
screen.
Screen mode button.
Dwell button (see 5.2.2 Quick Sequence View and 5.2.4 Scheme View In
Sequence for details).
Click it to enable OSD; click again to disable OSD.
Click to set the default playback time before starting instant playback (8.1
Instant Playback) or going to the playback interface for playback operations
(8.2 Playback Interface Introduction); click to go to the playback interface.
For instance, if you choose “5 minutes ago” as the default playback time, you
can playback the record from the past five minutes.
Manual record button. Click it to enable/disable record.
Manual alarm button. Click it to trigger or clear the alarm-out manually in the
popup window.
Record status button. Click it to view the record status.
Alarm status button. Click it to view the alarm status.
/
Disk status button. Click it to view the disk status and RAID status.
/
Network status button. Click it to view the network status.
Information button. Click it to view system information.
Click this button to enable cloud upgrade.
Note: Different models may have different buttons on the live view interface. See the following
picture. All pictures in this manual are for reference only; the real product takes precedent.