Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
25
Introduction of area ②:
Area ② is hidden by default. Move the cursor to the right to reveal this area. Click “Camera” to
view all the added cameras in the camera list. Select one camera window on the left side of the
interface and then double click one camera in the list to preview the camera image in the selected
window.
Click on the top right corner and then select “Single Channel Sequences” to view all the
added groups in the group list; click one group in the list to view all the added cameras in the
group (refer to 4.2 Add/Edit Camera Group for detail configuration of the camera group). Select
one camera window on the left side of the interface and then double click one group in the group
list to preview the cameras’ images one by one in the selected window.
Click on the top right corner and then select “Customize Display Modes” to view all the
display modes in the display mode list (refer to 5.2.1 Preview By Display Mode for detail
configuration of the display mode). Double click one display mode in the list to switch to the
display mode for previewing.
Click on the top right corner and then select “Target Detection” to go to target detection
interface. This tab will show the captured human, vehicles, license plates and face images. (This
function is only available for some models).
Introduction of area ③:
Icon / Button
Meaning
Shows the current login user.
VITEK Industrial Video Products
–
Transcendent Series NVRs
26
Icon / Button Meaning
Click to go to the intelligent analytics interface.
Click to go to record search and backup interface, see 8.4 Record
Search, Playback & Backup for details.
Click to go to playback interface (click on the tool bar at the bottom
of the live preview interface to set the default playback time), see 8.2
Playback Interface Introduction for details.
Click to enter the setup panel, see 3.2.2 Setup Panel for details.
Click to log out the system.
Click and then select “Logout”, “Reboot” or “Shutdown” in the popup
window.
3.2.2 Setup Panel
Click StartàSettings to bring up the setup panel as shown below.
The setup panel includes seven modules. Each module provides some function entries with links
for convenient operation.
Take Camera module as an example. The Camera module provides convenient links such as
“Add Camera”, “Edit Camera”, “Image Settings”, “Motion” and “PTZ”. Click Camera to go to
the camera management interface as shown below.