Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
27
There are some function items on the left side of the camera management interface. Click each
item to go to corresponding interface or window. For instance, click “Add Camera” to pop up
the window as shown below.
Click the main menus on the top of the camera management interface to go to corresponding
interfaces. Refer to the picture below. For instance, you can go to system setup interface by
clicking “System” tag.
3.2.3 Main Functions
Ø Camera
This module covers the functions such as Camera Management (see Chapter 4 Camera
Management for details), Image Settings (see 5.4 Preview Image Configuration for details),
Motion (see 11.2 Motion Alarm for details), and PTZ (see Chapter 6 PTZ for details) and so on.
Ø Record
This module covers the functions such as Encode Parameters and Record Schedule. Please see
Chapter 7 Record & Disk Management for details.
Ø AI/Event
This module covers the functions Smart Event, Combination Alarm, Exception, Sensor and