Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
27
There are some function items on the left side of the camera management interface. Click each
item to go to corresponding interface or window. For instance, click “Add Camera” to pop up
the window as shown below.
Click the main menus on the top of the camera management interface to go to corresponding
interfaces. Refer to the picture below. For instance, you can go to system setup interface by
clicking “System” tag.
3.2.3 Main Functions
Ø Camera
This module covers the functions such as Camera Management (see Chapter 4 Camera
Management for details), Image Settings (see 5.4 Preview Image Configuration for details),
Motion (see 11.2 Motion Alarm for details), and PTZ (see Chapter 6 PTZ for details) and so on.
Ø Record
This module covers the functions such as Encode Parameters and Record Schedule. Please see
Chapter 7 Record & Disk Management for details.
Ø AI/Event
This module covers the functions Smart Event, Combination Alarm, Exception, Sensor and
VITEK Industrial Video Products
–
Transcendent Series NVRs
28
Motion Alarm Handling and Alarm Out Settings. Please see Chapter 9 AI Event Management
and Chapter 11 General Event Management for details.
Ø Disk
This module covers Disk Management, Storage Mode and Disk Information. Please see
Chapter 7 Record & Disk Management for details.
Ø Network
This module covers the functions TCP/IP, DDNS, Port, E-mail and Network Status. Please see
13.1 Network Configuration for details.
Ø Account and Authority
This module covers the functions Account Management (see 12.1 Account Management for
details) and Permission Management (see 12.3 Permission Management for details).
Ø System
This module covers Basic Configuration (see 13.2 Basic Configuration for details), Device
Information (see 13.8 View System Information for details), Log Information (see 13.7 View
Log for details) and Configuration File Import&Export (see 13.5 Backup and Restore for details)