Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
29
4 Camera Management
4.1 Add/Edit Camera
4.1.1 Add Camera
The network of the NVR should be set before adding IP camera (see 13.1.1 TCP/IP Configuration
for details).
Refer to the pictures below. Click Add Camera in the setup panel or in the top right corner
of the preview window to pop up the “Add Camera” window as shown below. You can quickly
add or add the IP camera manually.
Ø Quickly Add
Check the cameras and then click “Add” to add cameras. Click to edit the camera’s IP
address, username and password. Click “Default Password” to set the default username and
password of each camera.