Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
31
Ø Add Recorder
l Quickly Add：Select the searched NVR/DVR and then click “Add” to add NVR in
the same local network.
l Manually Add：Click “Manual Add” and then enter the IP address or domain
name, port, username and password of the NVR/DVR. Check the added remote
channel number and click “Test”. Then click “OK” to return to the previous interface.
VITEK Industrial Video Products
–
Transcendent Series NVRs
32
Note: Only the local NVR has unoccupied channels, may the IPC of other NVR/DVR in the
same local network be added. And the added IPC supports previewing and recording.
4.1.2 Edit Camera
Click “Edit Camera” in the setup panel to go to the interface as shown below. Click to view
the live image of the camera in a pop-up window. Click to edit the camera (see Add camera
in 3.1 Startup Wizard for details). Click to delete the camera. Click in the “Operation”
header line and then click “Modify IPC Password” to pop-up a window(check the IPCs in the
window, set the new password and then click “OK”; only the online IPCs’ passwords can be
modified and a batch of IPCs’ passwords can be modified at the same time). Click to
upgrade an online IPC ( or click in the “Upgrade” header line and then click “IPC Batch
Upgrade” to upgrade a batch of IPCs), select the device which stores the upgrade file in the
“Device Name” item of the pop-up window and the upgrade file in the list(you should select the
upgrade IPC model in the window if a batch of IPCs’ passwords need to be modified) and then
click “Upgrade” to start upgrading(the IPC will restart automatically after the upgrade is
completed successfully).
Note:
If you use the NVR with the PoE network ports, the IP cameras (with PoE function) which are
directly connected to the PoE port of the NVR will be displayed automatically in the camera list.
Refer to the picture below. The IP camera which occupies the PoE resource has a prefix shown
before its camera name. The prefix consists of PoE port number. The IP camera which connects
to the PoE port cannot be deleted from the camera list manually.