Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
35
5 Live View Introduction
5.1 Live View Interface Introduction
First, you should add a camera after logging on to the system (see 4.1.1 Add Camera for details).
Refer to the interface shown below, drag one camera in the preview window to another window
for camera window exchanging. Click button and then you can view the record symbols.
The record symbols with different colors in the live preview window refer to different record
types when recording: green stands for manual record, red stands for sensor based record, yellow
stands for motion based record, blue stands for schedule record and cyan stands for intelligence
record.
Click the preview window to show the tool bar as shown in area ①; right click the preview
window to show the menu list. The tool bar and menu list are introduced in the table below.
Button
Menu List
Meaning
--
Move tool. Click it to move the tool bar anywhere.
Manually Record On
Click it to start recording.
Instant Playback
Click to playback the recording; click “Instant Playback” to
select or self-define the instant playback time. See 8.1 Instant
Playback for details.
Enable Audio
Click to enable audio. You can listen to the camera audio by enabling
audio.
--
Original Proportions/
Overspread window
Click to select the display proportion of the window.
VITEK Industrial Video Products
–
Transcendent Series NVRs
36
Button Menu List Meaning
Snapshot
Click to pop-up the snapshot window. Click “Save” in the window to
save the image. Click “Export” to export the image.
PTZ Control Click to go to PTZ control interface. See Chapter 6 PTZ for details.
Zoom In Click to go to single channel Zoom interface.
--
Click to go to image adjustment interface. Refer to 5.4.5 Image
Adjustment for details.
Start/Close Talk Click to start talk.
Target detection
Click to go to single channel target detection interface; the target
includes faces, human bodies and vehicles. (only applicable to some
models)
-- Camera Info Click it to view the camera information.
The single channel Zoom interface is as shown below. Press and drag the blue box to select the
zoom area. Click / to zoom into / out of the image. Click the camera selection box
to select other cameras for Zooming. Click “Back” to return to the live preview interface.
5.2 View Mode
5.2.1 Preview By Display Mode
Set different screen modes and cameras’ display sequences as required and then save the display
modes classified by surveillance areas, priorities etc. Refer to the picture below. Double click
one display mode in the display mode list to view the live images in this mode.