Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
37
Ø Add Display Mode
Method One:
① Click “Customize Display Modes” in the above interface
② Click to add a display mode name and then set the screen mode.
③ Add the cameras and adjust the cameras’ display sequence as required.
④ Click under the display mode list.
Method Two:
① Click StartàSettingsàSystemàBasicàOutput Settings to go to the interface and then set
the screen mode.
② Double click the camera or camera group in the list to add them to the selected window.
③ Click to save the current display mode (refer to 5.2.4 Scheme View In Sequence for
detail configurations). The display mode will be saved and displayed in the display mode list in
the live preview interface.
Ø Edit Display Mode
Click “Customize Display Modes” tab in the live preview interface and then select one display
mode in the list. Click to edit the display mode name; click to delete the display mode.
Ø Corridor Pattern
Some models may not support this function.
Select corridor pattern in display mode. You can change the direction of the video image by
using this function. Please refer to User Manual of relevant camera.
VITEK Industrial Video Products
–
Transcendent Series NVRs
38
Ø Fisheye Mode
Some models may not support this function.
In the live preview, select the view mode according to the installation mode and display mode
of the fisheye camera. Please refer to User Manual of relevant camera.
5.2.2 Quick Sequence View
You can start quick sequence view if the scheme has not been created. If the scheme has been
created, please refer to 5.2.4 Scheme View in Sequence for details.