Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
43
⑦ Choose the manufacturer of the POS device.
⑧ Click “Apply” to save the settings and then the transaction information will be displayed on
the preview image in real-time.
One POS is bound to one camera:
One POS is bound to multiple cameras:
VITEK Industrial Video Products
–
Transcendent Series NVRs
44
5.4 Preview Image Configuration
5.4.1 OSD Settings
Click StartàSettingsàCameraàImageàOSD Settings to go to the interface as shown below.
Select the camera, enter the camera name (or double click the camera name in the camera list to
change the camera name), enable or disable the name and time OSDs (if enabled, drag the red
name and time OSDs directly in the image view area to change the OSDs’ display position) and
select the date and time formats. Additionally, water mark can be enabled or disabled here.
Having enabled the water mark function, you can enter the information of the water mark as
needed. Finally, click “Apply” to save the settings.