Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
45
5.4.2 Image Settings
Click StartàSettingsàCameraàImageàImage Settings to go to the following interface. Select
the camera and then set the brightness, contrast, saturation and hue of the camera. Click the
“Advanced” button or in the camera list on the right side of the interface to pop up the
“Image Adjust” interface and then set the relevant setting items. Please refer to 5.4.5 Image
Adjustment for detailed introductions of these items.
You can click “Default” to restore the image settings to the default factory settings.
5.4.3 Mask Settings
Some areas of the image can be masked for privacy. Up to four mask areas can be set for each
camera. Click StartàSettingsàCameraàImageàMask Settings to go to the interface as shown
below.
Select the camera and enable the mask. Click the “Draw” button and then drag the mouse on
the image area to set the mask area; click the “Delete” button to delete the mask areas; click
“Apply” to save the settings.