Manual

V
ITEK Industrial Video Products
–
Transcendent Series NVRs
49
6 PTZ
6.1 PTZ Control Interface
You can control the IP dome or PTZ which connects to the IP camera for PTZ control.
Click on the tool bar at the bottom of the live preview window to go to the PTZ control
interface as shown below.
The direction, zoom, focus, iris and speed can be controlled in the small PTZ control window.
Right click the PTZ/speed dome camera window and select “PTZ Control” to go to the PTZ
control panel as shown below.
Introductions of the buttons on the bottom right of the interface:
V
ITEK Industrial Video Products
–
Transcendent Series NVRs
50
Button Meaning
Click / / / / / / /
to rotate the dome. Click to stop rotating the dome.
Click / to zoom in / out the camera image.
Click / to increase / decrease the focal length.
Click / to increase / decrease the iris of the dome.
Drag the slider to adjust the rotating speed of the dome.
/ Click / to start / stop recording.
/ Click / to hide / show the analog joystick.
Click to return to the live preview interface.
Ø Analog Joystick Control
The analog joystick on the left side of the interface provides quick PTZ control. The dome or
PTZ will rotate when you drag the analog joystick. The farther you drag the analog joystick from
the middle of the image, the faster the PTZ rotates. The PTZ will stop rotating when you stop
dragging the analog joystick.
Ø 3D Control
Click the camera image on any area and then the image will be centered on the clicked point.
Refer to the picture as shown below. Drag the mouse from A to B to get a green rectangle and
the rectangle area will be zoomed in.