Manual

V
ITEK Industrial Video Products
–
Transcendent Series NVRs
55
Ø Add Cruise
Click in the camera list on the right side of the interface to display the cruise information
of the dome and then click to add cruise. The operations of the “Add Cruise” window
are similar to that of the PTZ control interface; please see 6.1 PTZ Control Interface Introduction
for details.
Ø Edit Cruise
Select the camera and cruise in the “Cruise” interface. Enter the new cruise name and then click
to save the cruise name. Click “Add Preset” to add preset to the cruise. Click to edit
the preset. Click to delete the preset from the cruise. Click one preset in the preset list and
then click to move down the preset and click to move up the preset. Click to
start the cruise and click to stop it.
Ø Delete Cruise
Click in the camera list on the right side of the interface to display the cruise information
of the dome and then click on the top right corner of the cruise to delete the cruise.
6.4 Cruise Group Settings
Click StartàSettingsàCameraàPTZàCruise Group to go to the interface as shown below.