Manual
V
ITEK Industrial Video Products
–
Transcendent Series NVRs
57
Ø Play or Stop Trace
Select the trace and click to play the trace; click to stop the trace.
Ø Modify the Trace Name
On the left panel, enter new trace name and click to modify and save the trace name.
Ø Delete the Trace
Click to delete the trace. Or put the cursor on the trace name (right panel) and then
will appear on the right corner of the trace name; click to delete this trace.
6.6 Task Settings
Click StartàSettingsàCameraàPTZàTask to go to the interface as shown below.
V
ITEK Industrial Video Products
–
Transcendent Series NVRs
58
① Select a PTZ camera.
② Select function, such as preset, cruise, trace, random scanning, etc.
③ Select a name, such as preset name, cruise name, etc.
④ Select the start and end time.
⑤ Click “Add” to add the task.
⑥ Click to extend the tasks of the PTZ camera. Click beside “Enable” to enable the
task. After the task is enabled, the PTZ camera will start the specific task at the specified time.