Manual

VITEK Industrial Video Products

–

Transcendent Series NVRs

7 Record & Disk Management

7.1 Record Configuration

7.1.1 Mode Configuration

Please format the HDDs before recording (refer to 7.5 Disk Management for details). Click

StartàSettingsàRecordàMode Settings to go to the mode settings interface. You can set the

record time under the “Manual Record Settings” and then click “Apply” to save the settings.

There are two record modes: auto mode and manual mode.

Ø Auto Mode

Motion Record: Motion alarm record will be enabled when motion is detected.

Sensor Record: Sensor alarm record will be enabled when sensor alarm trips.

Motion Record+Sensor Record: Motion/sensor alarm record will be enabled when

motion/sensor alarm occurs.

Always(24

ⅹ

7) Record+Motion Record: Normal record is enabled all the time; motion alarm

record will be started when motion is detected.

Always(24

ⅹ

7) Record+Sensor Record: Normal record is enabled all the time; sensor alarm

record will be started when sensor alarm trips.

Always(24

ⅹ

7) Record+Motion Record+Sensor Record: Normal record is enabled all the time;

motion/sensor alarm record will be enabled when motion/sensor alarm occurs.

Always(24

ⅹ

7) Record+ Motion Record + Sensor Record + AI Record: Normal record is

enabled all the time; AI record will be enabled when AI event happens.

Yo u can add more auto modes on analytics record. Click “Advanced” to pop up a window as

shown below. Check the modes in the window and then click “Add” to show the modes in the