Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
73
Button
Meaning
Fast Play button. Click it to increase the playing speed.
Previous frame button. It works only when the forward playing is paused in
single screen mode.
Next frame button. It works only when the forward playing is paused in single
screen mode.
Click to step backward 30s and click to step forward 30s.
Click it to enter the smart playback interface
Event list/tag button. Click it to view the event record of
manual/schedule/sensor/ motion and the tag information.
Watermark button. Click it to enable watermark; click it again to disable
watermark.
Open/close POS information.
/
Backup button. Drag the mouse on the time scale to select the time periods
and cameras, and then click the button to back up the record. : Backup status
button. Click it to view the backup status.
Back button. Click it to return.
Note: Some models may not support face search and face smart playback.
Introduction of area ②:
Button
Meaning
Click it to go to the intelligent analytics interface.
Click it to go to record search and backup interface; see 8.4 Record Search,
Playback & Backup for details.
Click it to go to live preview interface; see Chapter 5 Live View
Introduction for details.
Click on the playback window to show the tool bar as shown in area ③; right click on the
window to show the menu list. The tool bar and menu list are introduced in the table below.
Button
Menu List
Meaning
--
Move tool. Click it to move the tool bar anywhere.
Enable Audio
Click it to enable audio. You can listen to the camera audio by
enabling audio.
Snap
Click it to snap.
VITEK Industrial Video Products
–
Transcendent Series NVRs
74
Zoom In
Click to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live preview interface.
Click to pause the record playing; click to play the
record. When the record is paused in forward playing mode, you
can click to view the previous frame and click to
view the next frame.
Add Tag
Click to add tag. You can play back the recording by searching the
added tag. Click it and then enter the tag name in the popup
window. Click “Add” to add tag.
Switch Camera
Click to switch the playback camera. Click it and then check the
camera in the popup window. Click “OK” to change the camera.
Close Camera Click to close the playback camera.
Introduction of area ④:
Click to set the date; click to set the time and then the playback camera will play the
recording from the time you set. You can check the recording type as required for recording
playback; first you should click on the tool bar at the bottom of the interface to clear all the
playback cameras, then check the recording type ( : manual recording; : sensor based
recording; : motion based recording; : schedule recording; : AI recording; : POS
recording, if you want view the detailed smart playback icons, click to switch). Finally, click
in the playback window to add cameras for playback (the recording time scale will show the
record data of the checked recording type only after the above operations).
Introduction of the recording time scale (area ⑤):
A tool bar will appear after moving the mouse to the recording time scale. Click / to
zoom the timeline; click to recover the timeline to 24 hours’ ratio. Drag the timeline or
slide the scroll wheel of the mouse on the time scale to show the hidden time on the top or bottom
of the timeline. You can also click to show the hidden time on the top of the timeline or
click to show the hidden time on the bottom of the timeline. Drag the slider at the bottom
of the time scale to show the hidden playback cameras.
The recording time scale shows different recording types with different colors. The green block
stands for manual recording, red block stands for sensor based recording, yellow block stands
for motion based recording, blue block stands for schedule recording and cyan block stands for
intelligence recording. Click the recording block to set the time and then the playback cameras
will play the recording from the time you set.
Backup Introduction:
Insert the storage device into the device. Drag the color block on the time scale to select the
backup area and then right click the area or click to pop up a backup information window.
Click the “Backup” button in the window to pop up the backup window. Select the device, backup
path and backup format and then click the “Backup” button.