Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
77
8.3.2 Smart Playback Based on Motion Detection
l Smart Playback by Drawing Grid
Click and draw a rectangle in the desired area. Then the system will automatically search
the recorded files of this area. The cyan blocks indicate that there are intelligent recording files.
Move the cursor to such block and click to play the record.
l Smart Playback by Drawing Line
Click and draw a line in the desired area. Then the system will automatically search the
recorded files about crossing this line. The cyan blocks indicate that there are intelligent
recording files. Move the cursor to such block and click to play the recording.
l Smart Playback by Drawing Quadrilateral
Click and draw a quadrangle in the desired area. Then the system will automatically search
the record files of this area. The cyan blocks indicate that there are intelligent recording files.
Move the cursor to such block and click to play the recording.
VITEK Industrial Video Products
–
Transcendent Series NVRs
78
8.3.3 Smart Playback by Face Search
Before starting this function, the face recognition function should be enabled. Please see Face
Recognition for details. If your device doesn’t support such function, please skip the following
instructions.
① In the smart playback interface, click to pop up the following window.
① Set similarity. The higher the sensitivity value is, the lower the searching accuracy is, and
vice versa.
② Select targets. You can select targets from recent, face database, snapshot gallery or
external faces.
③ Select search mode. There are two search modes: search by group and search by face.