Manual

VITEK Industrial Video Products

–

Transcendent Series NVRs

② Select one camera in the interface and then click the “Open” button.

③ Click the image box to play the recording in a small playback box on the left side of the

interface (the box which has image inside indicates that the recording data exist).

④ Refer to the picture below. Drag the color blocks on the time scale to select the recording

data and then click “Backup” button to pop up the “Record Backup” window as shown below.

Select the device name, backup format and path and then click “Backup” button to start the

backup.

Note: If you back up the recording in private format, the system will back up the RPAS player to USB

device automatically. The private format recording can be played by RPAS player only.

VITEK Industrial Video Products

–

Transcendent Series NVRs

⑤ Click “Playback” to play the recording in the playback interface (refer to 8.2 Playback

Interface Introduction for details). Click “Close” to close the interface.

Time Slice Mode Selecting:

Method One: Click “Ye a r ”, “Month” or “Day” button under the recording time scale to select

the time slice mode. In “Day” mode, click / on the left/right side of the time scale to

view the recording of the last/next day; click “Minute” in the “Picture” option under the time

scale to select “Minute” mode (in “Minute” mode, click the time scale to change the time of the

60 display windows) and click “Hour” to select “Hour” mode.

Method Two: Click beside “Camera Thumbnail” on the left top corner of the interface to

select the time slice mode.

Method Three: Right-click the mouse on any area of the time-sliced interface to go back to the

upper interface.

8.4.2 Search, Playback & Backup by Time

① Click StartàSearch and BackupàBy Time to go to “By Time” tab as shown below.

② Click on the bottom of the interface to add playback camera. A maximum of 16

cameras can be added for playback. Click “Modify” on the top right corner of the camera window

to change the camera and click “Clear” to remove the camera.

③ Click the camera window to play the recording in a small playback box on the left side of

the interface. You can set the date on the top left of the interface, check the event type as required

and click the time scale or click under the time scale to set the time. The camera window

will play the recording according to the time and event type you set.

④ Drag the color blocks on the time scale to select the recording data (or click “Set Backup

Time” on the bottom left corner of the interface to set the backup start time and end time) and

then click “Backup” for recording backup. Click “Playback” to play the recording in the playback