Manual

VITEK Industrial Video Products
–
Transcendent Series NVRs
85
8.4.6 View Backup Status
Click StartàSearch and BackupàBackup Status or click on the tool bar at the bottom of
the playback interface to view the backup status.
VITEK Industrial Video Products
–
Transcendent Series NVRs
86
9 AI Event Management
9.1 Face Recognition
Only some models support alarm based on face match. If your device does not support face
recognition function, please skip the face database, and face recognition instructions.
Please set face recognition function according to the following procedures for the first time.
Set face detection and alarm linkage
à Add face group à Add faces to the face group à Enable
and set successful recognition (or stranger)
à Set successful recognition (or stranger) alarm
linkage
9.1.1 Face Detection Settings
Face Detection: Alarms will be triggered if someone intrudes into the pre-defined alarm areas.
① Click StartàSettingsàAI/EventàAI EventàFace Recognitionà Detection to go to the
following interface.
② Select the camera, check “Enable Detection by IPC” and set the duration.
Note: Some models may support face detection by NVR. For these models, the camera without