User manual

ENVI Series IP Configuration Manual

________________________________________________________________________________

 Sensor Input

ENVI IP2 Series cameras support one sensor input. Status of the sensor is displayed in real

time. When the sensor connected to the ENVI IP2 camera is working, the light turns red.

 Alarm Output

ENVI IP2 Series cameras support one Alarm output. A number icon indicates status of the

alarm device. To operate the alarm device, press the number icon.

 Screen Capture

Capture pictures and store them as BMP or JPEG files.

 File record

Recording to an AVI file on a live view page is available. AVI files are generated in the specified

folder or in a specified file name on the PC where web browser is running.

1. Enter the drive and the folder name on the PC and enter

the AVI file name to be used.

2. Press the “Start” button to start to record.

3. Press the “Stop” button to stop to record.

4. AVI file named “File name_IP address_hh_mm_ss” will be generated in the specified

folder.

2. Initialization of IP Address

If a system IP address is lost, the system can be reset to the system default IP address using the reset

button in the back of the system.

① While system is in operation, press the reset button for 5+ seconds.

② The system will reboot automatically

③ Once the system reboots, the IP address will be set to the system default as below.

 IP mode

Fixed IP

 IP address

192.168.10.100

 Subnet mask

255.255.255.0

 Gateway

192.168.10.1

 Base port

2222

 HTTP port