User manual

ENVI Series IP Configuration Manual
________________________________________________________________________________
23
 HTTP Port
HTTP port used for web-based connection
 RTSP Port
Enter RTSP port, which is used for RTSP-based connection. The default RTSP port is 554.
RTSP (Real Time Streaming Protocol) is a standard for connected client(s) to control
streaming data over the World Wide Web
 Authentication
 RTSP Authentication
If RTSP Authentication set to ON, user should enter correct User ID and Password when any
RTSP client is connected.
 HTTP API Authentication
When HTTP API authentication set to ON, HTTP Authentication is asked for all clients who
use HTTP API.
 RTP Session
 RTP (Real-Time Transport Protocol) is an Internet protocol used for transmitting single real-
time multimedia data such as audio or video to a select group of connected clients. Normally
RTSP uses RTP to format packets of multimedia content. RTP Session menu is used when
the RTP only streaming without RTSP connection. RTP stream will be transmitted to the
destination set. The SDP (Session Description Protocol) file can be found in the server, and a
client can retrieve it using http connection.
Related settings are as follows:
- Destination IP: Set the IP Address for your destination system which will receive RTP stream.
- Destination Port: Set the Port for your destination system which will receive RTP stream.
- User Name: Enter the User name that will be used as session name in the SDP file.
- File Name: Enter the file name that will be used as the name of the SDP file. Then, it can be
accessed through http://ServerAddress/filename