User manual

ENVI Series IP Configuration Manual
________________________________________________________________________________
25
 Bitrate control
 When there is more than one client connected to the ENVI IP2 camera, some of them do not
have enough bandwidth to receive encoded stream completely due to bandwidth difference
among the clients. In this case, it is possible to select the way to stream video to clients as
follows:
- Frame Drop Mode: Encoding will be adjusted to the client with the highest bandwidth. Clients
with limited bandwidth may not receive all the frames.
- Suppression Mode: Bit rate and frame rate are adjusted most efficiently for all clients. In this
case, all clients can be affected by the averaged bit rate and frame rate.
 Address Info
The following network information is displayed (Read only).
 IP Address: The server‟s own IP address. This information is useful when the server‟s IP
mode is set to DHCP.
 Domain Name: The registered domain name is displayed in case the server is registered at
DDNS server. MAC Address: Display the MAC address of the server. The MAC address is
used in DDNS registration in case the server is registered as DDNS server.
 Connecting: Client IP Addresses that are currently connected to a system are listed. (1)
Indicates Primary streaming and (0) indicates secondary streaming.