User manual

ENVI Series IP Configuration Manual
________________________________________________________________________________
30
 Alarm and Beep activation duration
 Set the duration of alarm or beep activation in case of an event. If it is set to continuous, it will
be in an active state until an operator resets it manually.
 E-mail Notification
Specify where the event information is to be sent when E-mail is selected as an event action.
 Server Address: Enter an address of mail (SMTP) server.
 Port: Specify a port for SMTP operation (Port 25 is the default port in SMTP operation. If a
different port is configured in the SMTP server, this port needs to be changed accordingly).
 Sender Address: Enter an account registered in the SMTP server.
 ID & password: When the server requires authentication, ID and Password of an E-mail
account need to be entered.
 Destination address: Enter Destination address. More than one address can be entered by
delimiting comma (,) or semi-colon (;). Destination address can take up to 63 characters.
 Video Clip Attaching: Video clip stored at the moment of event can be attached as an AVI or
JPEG file format. If using dual Encoding, Primary video or Secondary video (H.264 only) can
be selected.
 FTP Upload
 Server Address: Enter the address of an FTP server to receive video files.
 Port: Specify a port for FTP operation (Port 21 is the default port in FTP operation. If a
different port is configured in the FTP server, this port needs to be changed accordingly.)
 ID & password: Enter ID and Password for accessing the FTP server.
 Upload video: Primary video and Secondary video (H.264 only), JPEG can be selected as an
upload method.
 Continuous upload: Continuous upload “on” allows video image to be transmitted regularly,
regardless of occurrence of events.
 Upload duration: Specify recording duration of a video clip to be transmitted.
 Upload interval: Specify transmission interval.
Recording duration is not included in transmission interval. For example, if Upload interval is
60seconds and Upload duration is 20seconds, a Video clip for 20seconds is transmitted every
80seconds.
 Event Record
Specify duration of recording video generated by events to send through E-mail or upload
through FTP.
 Pre-event Time: Specify the duration of recording before an event happens.
 Post-event Time: Specify the duration after the event is cleared.
 Max duration is 30 seconds