User manual

ENVI Series IP Configuration Manual
________________________________________________________________________________
31
6. Preset Configuration
This function is only available when a PTZ receiver is used with ENVI IP2 Camera.
Configure up to 15 preset positions. Preset function is not available on some PTZ receivers. Make sure
the PTZ receiver supports preset.
 Preset Configuration
 Set the PTZ Presets:
 Move cameras to desired view using PTZ control buttons.
 Enter Preset name.
 Press Set button.
 Once all the presets are set, press Save List button.
 Move to Preset Position
Select a preset from the Preset Menu and press the Go To button. The camera will move to the
selected preset position.
 Enter Nam
 Move PTZ
Camera
to normal view
 Press Set Button
 Save