User manual

ENVI Series IP Configuration Manual
________________________________________________________________________________
34
Disk status
Description
Disk error detected
Error.
No disk
Disk is not connected to the system.
Searching Disk information
Checking the status of disk. Refresh the page and wait
until the status is changed.
Mounting and
Recovering Disk...
Performing recovery process when disk damage is found.
It takes seconds or minutes to recover.
Disk format needed
Disk is attached, but the type of the file system is
unknown or damaged.
Unknown disk type detected
USB Disk available
- (format is recommended)
Disk is available, but formatting is recommended.
USB Disk available
Available to be used for recording
Disk formatting – Start
Disk is being formatted.
System should not be turned off during formatting.
Disk formatting
– Progressing……
Disk formatting
– Writing inode tables 63/619
Disk formatting
– Creating journal……
Disk formatting
– Writing Superblocks……
Disk format done,
Please wait for reboot.
Disk removed
or in abnormal state
Disk is detached during operation or there is damage on
the file system. If it happens while disk is connected, it is
recommended that you format the disk.