User manual

ENVI Series IP Configuration Manual
________________________________________________________________________________
4
1. Introduction
1. About User Manual
This user manual provides information on operating and managing the VITEK-ENVI Series IP products. The
manual includes instructions of installation, operation, configuration and troubleshooting.
2. Features
The ENVI Series IP Cameras are network cameras with remote live monitoring, and control via an IP
network such as LAN, ADSL/VDSL, and Wireless LAN.
 Video
 Highly efficient compression algorithm, H.264 & MJPEG support (Dual Streaming)
 Compression in various resolution: QCIF, CIF, Half-D1, D1
 Wide range of transmission rates: 32kbps ~ 8Mbps
 Various transmission modes: CBR, VBR
 Motion detection
 Network
 Fixed IP & Dynamic IP (DHCP) support
 1:1, 1:N support
 Multicasting
 Automatic transmit rate control according to network conditions
 Serial Data
 RS-485 support
 Data pass-through mode: Serial data communication between ENVI Series IP Products and
Decoder
 Sensor and Alarm
 Support direct connections of external sensor and alarm devices
 Event Alarm
 User Interface
 Diagnose and upgrade through dedicated program called ENVI VMS.
 System configuration using Internet Explorer