Use and Care Manual

will be continued automatically within 10 minutes, even without touching

“

START/STOP” button. If the break time exceeds 10 minutes the memory cannot be

kept and the bread maker must be restarted, but if the dough is no further than the

kneading phase when the power supply breaks off, touch the “START/STOP”

straight to continue the program from the beginning.

ENVIRONMENT

The machine may work well in a wide range of temperature, but there could be a

difference in loaf size between a very warm room and a very cold room. We suggest the

room temperature should be between 15℃ and 34℃.

WARNING DISPLAY

1. If the display shows “HHH” after the program has been started, the temperature inside

is still too high（accompanied by 5 beep sounds）. Then the program has to be stopped.

Open the lid and let the machine cool down for 10 to 20 minutes.

2. If the display shows“LLL”after pressing the START/STOP button ( except the

programs BAKE), it means the temperature inside is too low（accompanied by 5 beep

sounds）, stop sound by pressing the START/STOP button, open the lid and let the

machine rest for 10 to 20 minutes to return to room temperature.

3. If the display shows “ERR” after you have pressed START/STOP, the thermal resistor

value exceed scope, please check the sensor carefully by Authorized expert.

AUTO ADD INGREDIENT FUNCTION

This machine is capable of adding ingredient automatically for the programs of BASIC,

FRENCH, WHOLE WHEAT, SWEET, LOW SUGAR BREAD, RICE BREAD,

RICE FLOUR BREAD, QUICK, ITALIAN BREAD, GLUTEN FREE BREAD and

DO IT YOURSEL. Before making bread, pull out the ingredient box drawer by holding

the lock device and drawer handle, take the ingredient box out, put the ingredients needed

into the box and then replace the drawer. During operation, the ingredients will be

automatically poured into the bread pan.

FOR THE FIRST USE

The appliance may emit a little smoke and a characteristic smell when turning it on for the

first time. This is normal and will soon stop. Make sure the appliance has sufficient

ventilation.

1. Please check if all parts and accessories are “complete and free of damage”.