Use and Care Manual

6
INTRODUCTION OF CONTROL PANEL
(The silkscreen may be subject to change without prior notice.)
AFTER POWER-UP
As soon as the bread maker is plugged into the power supply, LCD will be illuminated
while a beep will be heard. If has not any operation, LCD will be extinguished after 20s;
The default setting of 900g and MEDIUM. “BASIC” are displayed on LCD.
START / STOP
For starting and stopping the selected baking program
To start a program, touch the “START/STOP” button once. the program starts. Enter
working status (if delay function is used, the time starts to count down, the appliance will
start to work when the remaining time equal to finish time set for this menu.). when unit
starts, only the selected one-level, second-level menu burn steady，others menus won’t be
displayed, time begin to count down. After enter the operation, unit will pause by pressing
“START/STOP” button once, and renew by pressing it again, if press “START/STOP”
button more than 2s, the program will be reset, a beep will be heard, program back to
standby status, default to select the one-level menu when starting, other menus burn
Under one-level menu
status, press this button
to enter second-level
menu. P
ress it each
time, can enter next
second-
level menu
which
can be set, it
circulates in order,
press this button for 2s,
it will back to
one-level menu;.
Set/display delay time
Set/display working time
If add ingredient
Warm
Baking
Inner circle is knead 1,
Outer circle is knead 2
Upper arrow is rise 1
Lower arrow is rise 2
Loaf size: 500g/750g/900g
Setting knob: under
one-
level menu status:
right-
rotate the Setting
knob, menu circulates by
the order of from up to
down, from left to right,
the direction is in reverse
if left-
rotate the Setting
knob; under second-level
menu status, related
function can be adjusted
under the selected menu.