User Manual

2. Secure the camera from the inner side of the mount panel by driving M3 screws to the

bottom of camera.

3. Locate the position where you want to install the wall mount bracket. Drill holes on the

wall for securing the bracket and for routing cables.

4. Route power lines and other cables through the wall and the bracket.

5. Secure the wall mount bracket to the wall using the included fasteners and screws.

6. Attach the camera and the mount panel to the wall mount bracket using the 5 screws

you previously removed.

7. Connect power lines and cables, and you may now begin the initial connection and

conguration.

M3X4

NOTE:

Use the correct type of screws when installing cameras to

the mounting cap. Refer to page 3 for the screw type.