User Manual

5
English
Below is a general, sample procedure using a wall mount bracket:
1. Locate the position where you want to install the wall mount bracket and camera. Drill
holes on the wall for securing the bracket and for routing the cables.
2. Secure the bracket by hammering anchors into the wall and then fasten screws through
the four mounting holes on the bracket.
3. Route power lines and other cables through the wall and the bracket.
4. Align the camera's mounting holes with the B holes. Secure the camera to the wall
mount bracket as shown below.
M4X8XD6 Screws
Aligned with B holes
Route cables through here
IMPORTANT!
Wall Mount Installation - FD8134V
The screws and mounting surface must be
able to support a weight of 4 kg.