User Manual

Below is a sample procedure using wall mount bracket and an FD8162:

1. Determine a hard surface wall location, and use the four mounting holes on the bracket

to mark the positions where holes will be drilled to secure the bracket.

Wall Mount Installation - FD8162

M4X15

A* holes

Camera Lens Orientation

2. Drill holes on the wall for securing the bracket and for routing cables.

3. Route cables through the wall and bracket.

4. Secure the wall mount bracket to the wall using the included screws and plastic

anchors.

5. Rotate the adaptor ring to match the camera lens orientation your prefer, e.g., to the

front or to the left. Secure the adaptor ring to bracket using the M4X15 screws to the A2

and A4 holes on the bracket.