PRO Professional Digital Echo Mixer with Dual Equalizers OWNER'SMANUAL DA-1055PRO

Connecting Source Players to the DA-1055 PRO
You can connect up to two A/V source players (CD+G player, DVD player, CD player, Mp3 player, etc.) to the DA-1055 PRO
simultaneously using RCA audio (red & white) and video (yellow) cables.
Connecting Audio
What you will need:
• Source player with RCA audio output jacks
• Pair of RCA audio cables. In most cases these are color coded red and white
1. Connect an end of each RCA cable to the Left and Right RCA audio output jacks on your source player.
2. Connect the other ends of each RCA cable to the AUDIO IN jacks, labeled CDG, on the rear panel of
the DA-1055 PRO.
3. Repeat steps 1 and 2 when connecting a second source player except this time connect to the AUDIO IN jacks
labeled DVD.
Connecting Video
What you will need:
• Source player with an RCA video output jack
• One RCA video cable. In most cases these are color coded yellow.
1. Connect one end of the RCA cable to the video output jack on your source player.
2. Connect the other end of the RCA cable to the VIDEO IN jack.
NOTE: For each source player, make sure to connect the video output to the same channel as the audio output.
i.e. If you have a CD+G player’s audio connected to the CDG AUDIO IN jacks, make sure you connect that players
video connected to the CDG VIDEO IN jack on the DA-1055 PRO.
Getting Connected
2
PLAY/PAUS E STOP P REV N EXT
REPE AT
OPEN /CLOS
E
DIGITAL KEY
CON TROL
DIGI TAL
ECHO
D V X - 8 8 0 P R O M U L T I F O R M A T K A R A O K E P L A Y E R
CDG
JPE G
PH O TO C D
RCA Optical
RCA Optical
RCA Optical
RCA Optical
PLAY/PAUS E STOP P REV N EXT
REPE AT
OPEN /CLOS
E
DIGITAL KEY
CON TROL
DIGI TAL
ECHO
D V X - 8 8 0 P R O M U L T I F O R M A T K A R A O K E P L A Y E R
CDG
JPE G
PH O TO C D
RCA Optical
RCA Optical