Owner's Manual

ManualsBrandsVOCOPRO ManualsAudio Equipmentwireless conference microphone

owner's manual

Digital Quad Conference

Summary of content (18 pages)

PAGE 1
Digital Quad Conference o w n e r ' s m a n u a l
PAGE 2
Table of Contents FCC Information ...................................................... 3 Listening for a Lifetime ............................................. 4 Safety Instructions ................................................... 5 Welcome ............................................................... 6 Getting Started ....................................................... 7 Getting Connected ................................................... 8 Discriptions and Functions ...........................
PAGE 3
FCC Information 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable(s) supplied with this product MUST be used. Follow all installation instructions.
PAGE 4
Listening for a Lifetime 6HOHFWLQJ ILQH DXGLR HTXLSPHQW VXFK DV WKH XQLW \RX·YH MXVW SXUFKDVHG LV RQO\ WKH VWDUW RI \RXU PXVLFDO HQMR\PHQW 1RZ LW·V WLPH WR FRQVLGHU KRZ \RX FDQ PD[LPL]H WKH IXQ DQG H[FLWHPHQW \RXU HTXLSPHQW RIIHUV 9RFR3UR DQG WKH (OHFWURQLF ,QGXVWULHV $VVRFLDWLRQ·V &RQVXPHU (OHFWURQLFV *URXS ZDQW \RX WR JHW WKH PRVW RXW RI \RXU HTXLSPHQW E\ SOD\LQJ LW DW D VDIH OHYHO 2QH WKDW OHWV WKH VRXQG FRPH WKURXJK ORXG DQG FOHDU ZLWKRXW DQQR\LQJ EODULQJ RU GLV
PAGE 5
Safety Instructions 8. Ventilation - The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots. CAUTION RISK OF SHOCK CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Only refer servicing to qualified service personnel. 9.
PAGE 6
Welcome And thank you for purchasing the Digital Quad Conference from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual consumers the opportunity to sound like a star with full-scale club models, in-home systems and mobile units.
PAGE 7
Getting Started WHAT’S IN THE BOX: - (4) Digital-Quad-Conference Mics - Digital-Quad Receiver - (2) Antennas - Power Adapter -1/4 Cable 7
PAGE 8
Getting Connected 1. Attach the Conference microphone to the base transmitter • Match Pins and slotted groove of the Female XLR on the microphone to the pins of the Male XLR on the transmitter base and press down ﬁrmly. • Tighten sleeve on the Microphone’s XLR connector by turning clockwise.
PAGE 9
Getting Connected 2. Insert 2 fresh 1.5-volt AA alkaline batteries. Microphone Battery Installation 1. Locate Battery compartment underneath receiver. 2. To remove the lid, press down on the tab and lift the lid upwards. 3. Insert 2 AA batteries making sure the batteries sit in the correct direction according to polarity (+/-). 4. Close battery compartment lid. Caution: To Avoid Battery Leakage • Be sure to insert batteries correctly and follow the microphone and battery manufacturer’s instructions.
PAGE 10
Getting Connected 3. Simply Turn the Microphone on by pressing the power switch. • Look for an illuminated RF led on the main receiver, this indicates that the Digital Quad Conference microphone has paired successfully. • Speak into the microphone and verify that the AF LED light ﬂashes for the corresponding connected channel. DIGITAL-QUAD CONFERENCE Your Digital Quad Conference is now connected to your Digital-Quad-Play.
PAGE 11
Getting Connected TO CONNECT TO A MIXER UNBALANCED 1/4” 1. Connect unbalanced 1/4” cable (included) to the unbalanced output from the Digital-Quad receiver. 2. Connect the other end of the 1/4” cable to a microphone input channel on a mixer/ampliﬁer. BALANCED XLR (OPTIONAL) 1. Connect 4 balanced XLR cables (not included) to the balanced outputs of the Digital-Quad receiver. 2. Connect each end of the XLR cables into individual microphone input jacks on a mixer/ampliﬁer to be used (ex.
PAGE 12
Descriptions and Functions 1. GRILL - Protects the microphone cartridge and helps reduce “breathy” and wind noise pick-up. 2. POWER switch – Press once to turn the microphone power ON and press again to power OFF. The microphone will almost instantly pair with the receiver module once powered on. 3. XLR CONNECTOR- threaded sleeve for secure connection. 4. BATTERY COMPARTMENT - Removable lid hides and protects the microphone battery.
PAGE 13
Descriptions and Functions RECEIVER - FRONT PANEL 1. ON/OFF Button - Powers the receiver on/off. 2. Mic Volume - Adjusts the volume of their respective microphone channels. 3. RF LEDs - Registers Mic status: LED will shine when associated mic is powered on. 4. AF LEDs - Registers Mic transmission: LED will ﬂash when audio is received. 5. BNC Connectors - Used to mount antennas. RECEIVER - BACK PANEL 1. Unbalanced Mic Out - Outputs all mic signals via the included 1/4” cable to a mixer or ampliﬁer. 2.
PAGE 14
Commonly Asked Questions Q. What do I do if my mics are cutting in and out? A. Make sure both antennas are ﬁrmly attached to their posts. A. Keep the receiver away from ﬂuorescent lights. A. Make sure microphones are being used within the operational range. A. Ensure batteries are not depleted. Q. There’s a thumping noise coming through the speakers, what is it? A. This typically occurs when the batteries are low. A. Less likely, it may be the power supply not providing the correct power.
PAGE 15
Speciﬁcations Type: Capacitance Frequency Repsonse: Polar pattern: Output Impedance: Sensitivity: Working distance: Battery: RF power: Band width: Radio Frequency Range: Modulation Mode: 100Hz~16KHz Cardioid 200: -40dB±2dB 20cm~40cm (8-16inch) AA 1.5V*2 10mW 300kHz 902.9-927.2MHz DQPSK Microphone Transmission Frequencies in MHz: A. 902.900 ORANGE B. 904.600 SKY BLUE C. 907.500 GRASS GREEN D. 910.700 RED E. 913.300 DARK BLUE F. 916.300 YELLOW G. 920.100 BLACK GREEN H. 925.
PAGE 16
Notes FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)ÿThis device may not cause harmful interference, and (2) this device must accept any (2)ÿinterference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 17