Please read this manual carefully before using this TV set and keep it for future reference. L4269 Thank you for choosing Legend.
Warning CAUTION RISK ELECTRIC SHOCK DO NOT OPEN ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Safety Instructions Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Introduction Contents War ni ng . . . . . . . . .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . 2 Sa fe ty I ns tr uc ti on s . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Introduction Co nt ro ls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. ..5 Co nn ec ti on O pt io ns . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. 6 Remote control . ............ . . . . . . . . .......... . . ......... 7 Installation Ac ce ss or ie s . . . . . . . . . . . .
Introduction Controls This is a simplified representation of the TV front panel, side panel control buttons and side inputs. TV Side panel controls and connections HL26R1/HL32R1/HL42XR1 L - AUDIO - R POWER VIDEO CH+ CH- VIDEO2 IN VOL+ VOL- USB MENU INPUT CH+ CHPOWER HDMI3 IN VOL+ VOL- HDMI4 IN MENU INPUT HL26K1/HL32K1/HL32XK1/HL42XK1 1.MENU: Menu display. Press to access the on-screen menu display 2.INPUT: Press to access the input source mode.
Introduction Connection Options 2 HDMI IN L DVI AUDIO 2 1 R Y Pb Pr L AUDIO R VGA AUDIO VGA 1 VIDEO L AUDIO R S-VIDEO L AUDIO R L AUDIO R VGA IN 1 AV OUT VIDEO IN COMPONENT IN OPTICAL OUT ANT IN Back panel connections 1. Digital Audio Output: Connect various types of digital audio equipment. NOTE: In standby mode, these ports will not work. 2. DVI Audio In: When using a DVI to HDMI adapter, connect the audio signal to these jacks. 3.
Introduction Universal Remote control The remote control cannot be operated unless the batteries are properly loaded. When using the remote control, aim it at the remote sensor on the TV. Function introduction 1 DVD TV 2 STB CABLE VCR AUD PICTURE AUDIO PC HDMI 15 3 4 16 17 5 INPUT 18 MUTE RECALL 6 19 7 VOL CH 20 MENU EXIT 21 8 9 22 ENTER SLEEP DISPLAY 10 23 USB PLAY/PAUSE STOP REC PREV NEXT 11 24 REV 12 REPEAT MTS/SAP FREEZE CH.
Installation External Equipment Connections Accessories DVD TV STB CABLE VCR AUD PICTURE AUDIO PC HDMI R TFT-LCD TV OWNER ' S MANUAL INPUT RECALL MUTE VOL Please READ this manual carefully before operating your TV, and retain it for future reference. CH MENU EXIT ENTER SLEEP USB DISPLAY PLAY/PAUSE STOP PREV REV REC NEXT REPEAT MTS/SAP FREEZE CH.
Installation External Equipment Connections NOTE: All cables shown are not included with the TV. Choose Your Connection There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of some different ways to connect your TV with different input sources.
Installation External Equipment Connections OPTICAL OUT 2 HDMI IN L DVI AUDIO 2 1 R Y Pb Pr L AUDIO R VGA IN 1 VGA VGA AUDIO 1 VIDEO L AUDIO R S-VIDEO L AUDIO R VIDEO L AUDIO R AV OUT COMPONENT IN How to use 1. Select the input source with using the INPUT button on the remote control. 2. Press / button to select the desired source. 3. Press ENTER button to confirm. 4. Operate the corresponding external equipment.
Installation External Equipment Connections Connecting a DTV(digital TV) COMPONENT HDMI Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes OPTICAL OUT 2 HDMI IN L DVI AUDIO 2 1 R Pb Y L AUDIO R Pr VGA IN 1 VGA VGA AUDIO 1 S-VIDEO L AUDIO R VIDEO L AUDIO R VIDEO L AUDIO R AV OUT Signal 480i 480p 720p 1080i 1080p COMPONENT IN How to use 1. Turn on the digital set-top box. (Refer to the owner`s manual for the digital set-top box.) 2.
Installation External Equipment Connections Connecting a computer How to connect 1. To get the best picture quality, adjust the VGA graphics card to 1024x768 . 2. Use the TV`s VGA or DVI (Digital Visual Interface)Audio IN port for audio connections, depending on your computer connector. If the graphic card on the computer does not output analog and digital RGB simultaneously, connect only one of either VGA IN or HDMI IN to display the VGAon the TV.
Installation External Equipment Connections HDMI and DVI input When the source device(DVD player or Set Top Box) supports HDMI How To Connect 1. Connect the source device to HDMI port of this TV with an HDMI cable(not supplied with this product). 2. No separated audio connection is necessary. How To Use If the source device supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.
Installation Cable sample HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Analog Audio Cable (Stereo to RCA type) (not supplied with the product) 14 TV LCD-TFT
Installation External Equipment Connections Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. HDMI3 IN HDMI4 IN Plug a set of headphones into the 3.5mm mini-jack socket on the side panel of the set. Note Prolonged use of headphones at a high volume may damage your hearing. You will not receive sound from the speakers when you connect headphones to the system.
Installation Removing the table stand and installing a wall mount bracket HL42XK1 Remove 4X M4 screws securing the stand to the TV, then remove the stand. 16 TV LCD-TFT Use 4X M6 screws to secure the wall bracket (not supplied) to the back of your TV.
Operation Operation In the manual, the OSD (on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation. There are several options you might need to set up in order for your TV to work properly. Read the instructions that follow. Initial Setup: Set according to the screen display. Switching On/Off the TV set 1 . First, connect power cord correctly. 2 . Select the viewing source by using INPUT button on the remote control. 3 .
Operation Channel menu This TV set has two methods to set channels, which are respectively Channel Scan, Channel Skip. In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV to set channel. Note The Channel menu will be only operated in normal TV mode. Video Channel Scan Tuner Antenna Channel Scan Audio 1. Press MENU button and then use / button to select Channel menu. 2. Press / ENTER button to select Tuner. 3.
Operation Select the desired program 1 . Using CH+/- buttons. Press CH+ button to select a channel number in number increasing direction. Press CH- button to select a channel number in number decreasing direction. Note If skip is ON on one channel, press CH+/- button, the channel will not appear. 2. Also can enter channel number directly,eg:2-0. Select the desired sound Press VOL-/+ buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~100.
Operation Video menu The TV menu gives you an overview of the menus you can select. Note Depending on the input signal, one or more menu items may not be selectable. How to select picture mode The picture mode provides the pre-defined images settings: Standard, Vivid, Custom and Mild . Video 1. Press MENU button and then use / button to select Video menu. 2. Press / ENTER button and then use / button to select Mode. 3. Press / button to select the option Standard, Vivid, Custom and Mild.
Operation Video menu Color temperature This will increase or decrease Warm (red) and Cool (blue) colors to suit personal preferences. Select Cool to give the white colors a blue tint, Standard to give the white colors a neutral tint, Warm to give the white colors a red tint. Advanced Video To adjust the picture in advanced: DNR, Black Level Extender, White Peak Limiter, CTI, Flech Tone, Adaptive Luma Control.
Operation Audio menu How to select audio mode 1 . Press MENU button and then use / button to select Audio menu. 2 . Press / ENTER button and then use / button to select Mode. 3 . Press / ENTER button to select the option Off, Concert, Living Room, Hall, Bathroom, Cave, Arena and Church. You can also press AUDIO button on the remote control to select the Audio Mode Off, Concert, Living Room, Hall, Bathroom, Cave, Arena and Church. How to Customize your own audio status 1 .
Operation Function menu Menu Language When you start using your set for the first time, you must select the language which will be used for displaying menus and indications. 1 . Press MENU button and then use / button to select Function menu. 2 . Press / ENTER button and then use / button to select Language. 3 . Press / button to select language.
Operation Function menu Wide Choose wide when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen. Cinema For letterbox pictures, bars may appear on the top and bottom on some programs. You can also press ARC button on the remote control to select the desired picture format: Normal, Zoom, Wide or Cinema. Blue Screen 1. Press MENU button and then use / Function menu. 2. Press / ENTER button and then use select Blue Screen. 3. Press / button to select On or Off.
Operation Function menu Sleep Timer setting The sleep timer automatically shuts off the TV after a preset time (from 5 to 240 minutes). 1. Press MENU button and then use / button to select Function menu. 2. Press / ENTER button and then use / button to select Time Setup 3. Press / ENTER button and then use / button to select Sleep Timer. 4. Press / button to select the number of minutes. Select Off,5Min,10Min, 15Min, 30Min, 45Min,60Min, 90Min, 120Min, 180Min or 240Min.
Operation Lock Menu Parental Control can be used to block specific channels, ratings and other viewing sources. The parental control function is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. Parental Control rating and categories Rating guidelines are provided by broadcasting stations.
Operation Lock Menu Lock setup Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. 1. Press MENU button and then use Lock menu. Then, press button. / The TV is set up with the initial password security default password is 9-4-4-3. button to select Video Enter Password Audio Channel 0-0-0-0 and Function Lock 2. Use / button to select the desired items, and press or ENTER button to enter the next menu.
Operation Lock Menu Lock setup A symbol will be displayed for each sub-rating. While is selected, press ENTER button to go to a sub rating. To select a different Rating, press / buttons and then repeat the process. Note The V-chip will automatically block certain categories that are More restrictive .For example, if you block sub-rating in TV-PG, then the sub-ratings in TV-14 and TV-MA will automatically be blocked.
Operation Other Functions Brief Info Brief Info shows the present screen information. Press DISPLAY button to show the Brief Info on the screen. Press DISPLAY button or EXIT button to exit. Function: Show the present screen information. Press DISPLAY button or EXIT button to exit.
Operation Other Functions Quick program view Press to jump back and forth between two channels. The TV alternates between the current channel and the last channel that was selected. 1 . Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure). 2 . If you want to return to the last watched program channel 8, you can simply press RECALL button. 3 . If you want to return to channel 18, press the button again.
Operation USB Input 1.Supporting media and file format: Digital pictures (.JPG) and digital music (.MP3) files Due to differences in the file code and file mode, It is possible that some files cannot be read. 2.Before starting operation, verify USB storage device is of FAT32 and FAT file system format. At present, this television does not support NTFS and the file systems of other format. 3.External card reader supports most digital cards available in the market.
Operation USB Input To play pictures and music together Insert USB drive with music and picture files in to the USB input , select the Music folder and choose the MP3 files to be played. Then select the pictures to be played. Please note as some files must be read while music is being played, the speed of picture operation response might be affected. 1.Press / button to select Music folder. Press ENTER to enter. 2.
Operation Universal Remote Control Setting Up Your Remote Control After it has been set up properly, your remote control can operate in six different modes: TV, DVD, VCR, SETBOX , CABLE or AUDIO. Note The remote control might not be compatible with all DVD Players, VCRs and Cable boxes. Control Operation 1.Program the Controller to work with your device. 2.Changing device mode by pressing the TV DVD STB CABLE VCR AUD key. When device is set, related device LED will be on for 1 second and then be off. 3.
Operation Universal Remote Control Display mode 1. choose the device you wish to program. 2.To enter display mode, while press and holding ENTER key, press the INPUT key and device LED will be ON, keep the status for about 3 seconds and the LED will blink, indicating that the Controller is ready for programming, then release both keys. 3. Sequence press 9, 8, 0 to enter display mode. 4.Press digit 1 key to get the first digit of current codeset.
Operation Universal Remote Control Remote Control Codes TV NO.
Operation Universal Remote Control Remote Control Codes NO.
Operation Universal Remote Control Remote Control Codes DVD NO. Brand NO.
Operation Universal Remote Control NO. Brand Remote Control Codes VCR NO.
Operation Universal Remote Control NO. Remote Control Codes SETBOX NO.
Operation Universal Remote Control Remote Control Codes AUDIO NO.
Operation Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1. Here`s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it`s almost dry, and then use it to wipe the screen. 2.
Specifications Product Specification Resolution 1920X1080(Dot) Power requirement 120V~ , 60Hz Stand-by Consumption less than 1W(models - HL26R1, HL32R1, HL26K1, HL32K1, HL32XK1) Color system NTSC ATSC Clear QAM External Antenna Impedance 75 ohm Color 16,770,000(256 steps of each R, G and B) Operating Temperature Range 32~104 F(0~40 C) Operating Humidity Range Less than 80% Maximum Elevation 6561 feet (2000m) MODEL HL42XK1 Dimensen(WX D X H ) Unit:inches/mm (Including stand) 40.3X12.
Troubleshooting Troubleshooting For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power. Verify if electricity is available. Blank screen Verify if correct signals are input.
