User manual

c) Main View of Display for Programmes and Battery Parameters

The placement of the rechargeable battery charging chutes on the display corresponds to that on the charger.

The wheel encoder can be used to select the rechargeable battery charging chutes to display the detailed view.

Pushing„OK“causesthedisplayoftheselectedchutetoswitchtothedisplayofthechargechart.

1 Selected rechargeable battery chemistry of the left (S1/S3/S5/S7) and right (S2/S4/S6/S8) round cell charging

chutes:Ifnorechargeablebatteriesareinserted,„NOCELL“willbedisplayed.

2 Statusdisplayofthechargingchutes„S1“to„S8“:Ifthebatteryisbeingprocessed,therechargeablebattery

symbol or an arrow are displayed alternatingly. The currently active programme is displayed as well. If no

rechargeablebatteryisinserted,„---“isdisplayed.

3 Statusdisplayofthetwo9Vblockchargingchutes„SA“and„SB“

4 Detailed view of the chosen charging chute

 Thefollowingaredisplayed:

 -Chargechutenumber(slot)

 -Chargeprogramme(e.g.„RECHARGE“)

 -Currentstep(„STEP“)andtheentirenumberofprogrammesteps

 -Elapsedprocessingtimeintheformat„DD/HH:MM“(DD=days,HH=hours,MM=minutes)

 -Currentrechargeablebatteryvoltage(U)

 -Charginganddischargingcurrent(I)

 -Charging(C)anddischargingcapacity(D)