User manual

51
Display of the charge charts at the charger:
The progress of the charge current and voltage curve across time can be displayed directly at the charger per
chargingchute.Forthis,thedesiredchargingchuteisselectedinthemainviewandconrmedwith„OK“.
By turning the wheel encoder, the display will switch between voltage and current progress and the combined view
of both. Pushing the wheel encoder again will return you to the main view.
StartingandendpointoftheY-axisaremarked,e.g.,withY=0.7-1.7V,whiletheX-axisshowsthetimefrom0to,
e.g., 00d08h (= 00 days, 08 hours). The axes are scaled automatically.
 Thechargeshowsnomaintenancecharge„TRICKLE“.
f) Programme Cancellation
Cancelling a current rechargeable battery programme is possible either by removing the rechargeable battery from
thechargingchuteorbyselecting„CANCELPRG“under„OPTIONS“.
g) Rechargeable Battery Evaluation
Evaluationoftherechargeablebatterytakesplaceautomaticallyintherechargeablebatteryprogrammes„CYCLE“,
„ALIVE“and„MAXIMIZE“.Aftercompletingtherechargeablebatteryprogramme,theresultappearsinfourstages
„TOP“/„FIT“/„OK“/„BAD“.
„TOP“representsthebestand„BAD“averybadrechargeablebatterycondition.
Whentheselectionremains„CAPACITYundened“,therechargeablebatteryisevaluatedautomaticallybycompa-
risonofthesuppliedtotheremovedcapacity(display„RATIO“).Theevaluationistobeobservedrelatively,since
the capacity indication of the rechargeable battery cannot be included in calculation.
A wrongly entered capacity value leads to wrong results in rechargeable battery evaluation. A still functio-
nalrechargeablebatterymaybeevaluatedasbadandadamagedoneas„TOP“.