User manual

28
Scope of Delivery
Multimeter with protection rubber frame
Compound 9V battery
K-type thermosensor (up to max. 200°C)
Multipurpose plug for the K-type thermosensor
Safety measuring wires red and black
Safety alligator clips
Inductive speed meter
Operating Instructions
Display Indications and Symbols
HOLD stands for data hold; the measuring value is kept (e.g. for the
record) until the "HOLD" button is pressed anew or the multi-
meter is switched off.
REL stands for the relative value measurement (=reference measu-
rement)
Auto stands for "automatic measuring range selection"
OL stands for overload = overload, the measuring range has been
exceeded
BAT battery replacement symbol; please replace the batteries
immediately to avoid measuring errors!
symbol for the diode test
symbol for the acoustic continuity tester
AC alternating size for voltage and current
DC direct size for voltage and current
V volt (unit of electric potential)
A ampere (unit of electric current)
Hz hertz (unit of frequency)
Ω ohm (unit of electric resistance)
F farad (unit of capacity)
°C grade centigree (unit of temperature)
% indication of the duty cycle of a signal in %
n nano (exp.–9)
µ micro (exp.–6)
m mill (exp.-3)
k kilo (exp.3)
M mega (exp.6)