Manualshelf

User manual

ManualsBrandsVOLTCRAFT ManualsLaboratory & Bench PSUsBench PSU (adjustable voltage) 0.02 - 84 Vdc 0.01
51525354555657585960
52
For example:
You want to set the transit time between the voltage sources A and B.
1. Press and hold the MENU (8) button for approximately 3 seconds.
2. Turn the setting controller VOLTAGE (4) until the following display appears:
3. Then press the setting controller VOLTAGE (4) to reach the setting mode.
4. Turn the setting controller VOLTAGE (4) until the following display appears:
5. Turn the setting controller CURRENT (5) until the following display appears:
6. Press the setting controller VOLTAGE (4),toconrmtheselection.
7. The transit time between the voltage source A and B now amount to 5 seconds.
8. Repeat the steps 1 to 4 for the other voltage ranges.
Transit times of 0 to 20 seconds can be set.