Instructions
Table Of Contents
- Copyright Declaration
- Contents
- Chapter 1 Introduction
- Chapter 2 Function Introduction
- Chapter 3 Waveform Generator
- Chapter 4 Troubleshooting
- Chapter 5 General Care and Cleaning
- Appendix A: Technical Specifications
- Appendix B: Accessories
- Appendix C Harmful and Poisonous Substances or Elements
- Appendix D To replace the fuse
- Appendix E Open Source Information
Digital Storage Oscilloscope 41
LIN Decode interpretation:
1. The decode data is displayed in hexadecimal;
2.
The decoded data is at the bottom of the waveform interface. The color of “frame
ID” and “checksum”decode data is displayed purple;
3. When there are "?" or "adjust the time base", you need to adjust the time base to
see the decoding results.
4.
In the Lin decode result, the synchronous field "55" is not decoded and displayed.
LIN text interface is shown as below:
1. ID: The ID value of the current frame;
2. Data: The data of the current frame;
3. Checksum.
2.7.12 CAN Trigger
1. Press the [Trig Menu] button on the front panel to enter the Trigger system function
menu.
2. Press the Type softkey, then turn the Universal Knob to select CAN and push down
the knob to confirm.
3. Press the Source softkey, turn the Universal Knob to select CH1~CH4 as the
trigger source.