Instructions
Table Of Contents
- Copyright Declaration
- Contents
- Chapter 1 Introduction
- Chapter 2 Function Introduction
- Chapter 3 Waveform Generator
- Chapter 4 Troubleshooting
- Chapter 5 General Care and Cleaning
- Appendix A: Technical Specifications
- Appendix B: Accessories
- Appendix C Harmful and Poisonous Substances or Elements
- Appendix D To replace the fuse
- Appendix E Open Source Information
Digital Storage Oscilloscope 75
3.3 Output Arbitrary Waveform
1. Press the Wave Gen button on the front panel to enable the AWG function and enter
the Wave Gen function menu.
2. Connect the device with PC which has installed the WaveEditor software using a
USB cable.
3. Double click the WaveEditor icon to open the program.
4. Select a waveform file or draw an arbitrary waveform; then click the in toolbar
and select waveform data download position to download waveform data to the device.
5. The waveform will output from GEN OUT BNC port.
Also, you can recall ARB format file in USB disk to output a waveform.
1. Press the Wave Gen button on the front panel to enter Wave Gen function menu.
2. Press the Wave softkey, turn the Universal Knob to select Arb1~Arb4 and then
push the knob to confirm.
3. Press Recall softkey and select desired recalled ARB format file in USB disk.
4. The waveform will output from GEN OUT BNC port.