User manual

Description of adjustable components

Illustration (open side)

1. Analog display with different colored indicating ranges 6 V/12 V

2. Zero-point correction (indicator zero position)

3. Toggle switch with automatic delay for measurement

4. Red terminal clamps for positive terminal (+) and black for nega-

tive terminal (-) of the battery

5. Cooling slots for shunt

Caution!

Observe maximum input values.

Contents list

Introduction ....................................................................................16

Intended use ..................................................................................17

Adjustable components (end side) ................................................18

List of contents ..............................................................................18

Safety instructions ..........................................................................19

Use of lead battery tester ..............................................................21

Measurement procedure ................................................................22

Disposal ..........................................................................................26

Maintenance ..................................................................................26

Technical data and measurement tolerances ................................27

Technical data and measurement

tolerances

Technical data

Display : Analog gauge with zero-point

correction

Test current : approx. 100 A of 5% at 13.2 V

Voltage measu- : approx. 0 to max. approx. 16 VDC

rement range (direct voltage)

Running voltage range : approx. 0 to max. approx. 16 VDC

Red area 6 V/12 V : < 4.6 V/< 7 to 9 V

Yellow area 6 V/12 V : 4.6 to 5.8 V/9.0 to 11.2 VDC

Green area : 5.8 to 7 V/9.4 (200 CCA*) to 12.8

(1000 CCA*) V

Operating temperature : 0° C to +55° C

Storage temperature : -20° C to +70° C

Relative humidity : max. 80%, non-condensing

Dimensions (L X B X H) : approx. 295 x 160 x 80 mm

(without lines)

* CCA = Cold Cranking Amps = cold starting current