User manual

11
10. OPERATION OF THE CHART FUNCTION
Enlarging to specic areas "Zoom" by mouse:
Keeptheleftmousebuttonpushedinthegraphicalviewandpullaframeoverthedesiredarea.Afterreleasingthemousebutton,thedisplay
willbeenlargedtotheselectedarea.
Alternatively:
• Right-clickingintheareaofthechartwillbringupaselectionoption(seegureontheright).
 "ZoomIn"=Enlargebyhalftherecord
 "ResetZoom"=Backtotheoverallview
• Dependingonthepointerpositionofthemouse,thescrollwheelmayalsobeusedtochange.
Moving the illustrated areas
Thisispossibleviathecursorbuttonsorthepicturescrollbarsatthecharts.
Furthercontroloptionsviathekeyboardare:
"Pos1"("Home") Restoreoverallview(like"ResetZoom")
"Del" Jump to the start of the recording
"End" Jump to the end of the recording
"Backspace" Resetzoombyonelevel
"PgUp" X-axisinlargestepstowardstheend
"PgDn" X-axisinlargestepstowardsthebeginning
Display of data at the mouse pointer position
Ifthemousepointerisononeoftheillustratedcurves,pushingtherightmousebuttonwillreturnthecurrentvalueatthattime.