User manual

8
8. MENU "SETTINGS"
Varioussettingscanbemadehere.
"COM-Port" SelectionoftheCOMportthroughwhichtheconnectiontotheGeigercounter"GammaCheckPro"isestab-
lished
"DeviceSetup" DevicecongurationoftheGeigercounter"GammaCheckPro"
"DisplayStyle" Settingthedatadisplay(tabledisplay,chartdisplayorbothdisplaysatthesametime)
Subfunction "Device Setup" (device conguration)
"SynchronizeTimeandDate" ThesettimeanddateoftheGeigercounter"GammaCheckPro"areadjustedtotheWindowssystemtime.
"PowerMode" "Auto-Off"meansthatthedisplaywillswitchoffonitsownafterapprox.30seconds.TheGeigercounter
"GammaCheckPro"continuestoworkinthebackground.Inoperatingmode"Always-On",thedisplayis
always on.
"Buzzer" With"ActivateBuzzer",theinstalledsignalencodercanbeswitchedonandoff.Whenthesignalencoderis
off,neitherpulsesnorpushesofbuttonsareacousticallyconrmed.Allothersignalscannotbedeactivatedfor
reasons of safety!
"Interval" Settingofthescanrateforsavingthelesinthedevicememory
"Mode" Settingofhowthestorageistobeused.
 For"FILLUP",datawillbesaveduntiltheentirestoragespaceisused.
 At"ENDLESS",therecordingwillruninanendlessloop.Thecurrentdataarealwayssavedand,ifrequired,
theoldestdatawillbeoverwritten(ringmemory).
 For"OFF",nodatawillberecorded.