Data Sheet
V
OLTCRAFT® - TOP PERFORMANCE IN EVERY WAY
“Since 1982, our product range has been dynamically adapting to the constant changes in the industry. We commit
to offering first-class quality to our customers while delivering an excellent cost-performance ratio. This
philosophy remains the cornerstone of Voltcraft’s success.”
PI-75
CAR INVERTER
V
ERSION 12/21
Nº 1591445
The inverter converts the DC output voltage of a cigarette lighter socket (10.5 to 15 V/DC) in a car into an AC voltage (of approx.
220 - 240 V/AC). This enables the connection of dierent types of AC-operated consumers to a car battery via an earthing
contact socket outlet. The AC voltage available is intended for the operation of devices of protection class I and II. It must
be ensured, however, that only the prescribed input voltage is used and/or that the maximum output power is not exceeded.
The maximum continuous power is 75 W. A USB charging port provides a charging station for compatible USB devices such
as mobile devices or power banks. The inverter is equipped with technical features such as automatic shut-o in the case of
undervoltage or overvoltage, overload or short circuit as well as overheat protection. The fuse protects the product in the event
of reversed polarity of the input voltage.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in bathrooms) must be avoided
under all circumstances.
HIGHLIGHTS
Inverter for connection to a 12 V/DC cigarette lighter on vehicle systems //
Overvoltage, overload and overheat protection for optimal eciency and safety //
Replaceable fuse for reverse polarity protection //
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the
time of printing.
© Copyright 2022 by Conrad Electronic SE.
1
591445_V4_1221_01_PIX_ds
PACKAGE CONTENT
Inverter module // 1x replacement fuse // Operating instructions //
TECHNICAL DATA
Input voltage/current 10.5 - 15 V/DC, 10 A
Output voltage/current 220 - 240 V/AC (±10 V), 50 Hz (±3 Hz), 0.68 A
Output power 75 W (continuous operation)/150 W (short-term peak)
USB voltage/current 5 V/DC, 2.1 A
Fuse 10 A
Signal output Modified sine wave ( )
No-load current ≤0.2 A
Degree of effectiveness ≥90 %
Low voltage shut-off 10 ± 0.5 V/DC
Operating conditions
0 to +30 °C at 100 % (full load) and to +40 °C at 50 % (load),
20 - 90 % relative humidity, non-condensing
Storage conditions -30 to +70 °C, 10 - 95 % relative humidity, non-condensing
Dimensions (W x H x D) 70 x 160 x 54 mm
Weight 240 g ± 10 g