Instructions

13. Troubleshooting

The multimeter was designed using the latest technology and is safe to use.

However, problems and malfunctions may still occur.

This section tells you how to troubleshoot common issues:

Always observe the safety information in these instructions.

Error Possible cause Solution

The multimeter

does not function

Are the batteries empty? Check the status. Replace the batteries.

The measured

value does not

change.

Have you selected the wrong measurement

mode (AC/DC)?

Check the display (AC/DC) and select

another mode if necessary.

Are the measuring leads plugged into the

measuring sockets correctly?

Check that the measuring leads are in the

correct position.

Is the hold function enabled ("HOLD")? Press the "HOLD" button to disable this

function.

You measured a DC current. The VC-522 current clamp is only suitable

for AC currents.

Any repair work other than that described above must be carried out by an authorized technician.

If you have questions about the multimeter, please contact our technical support team.