Manual

3
.
Functions and Operations
27
Data Record Function
Data record function includes manual record and auto record. You can use any or both
functions to record the data. Manual and automatic records share a table of data stored
in internal storage. The maximum number of recorded points is 1000. After collecting the
data, it can be exported to the computer.
Manual record: Press the key -> Manual -> Save softkey to save current reading
to the DB data.
Auto record: Press the key -> Auto softkey, after setting number of readings,
sample interval, press the Start softkey to the DB data.
Manual Record
1. Collect data: Press the front panel key, press the Manual softkey. Press the
Save softkey once to save the current reading to the data table by serial number. The
icon will show up on the top of the display.
Note: The measurement function can be switched during manual record. Save only
the main display readings.
2. View the manual record: Press the front panel key, press the Manual softkey
to display the data table. Press or keys to turn the page.
Note:
 When the recording data exceeds the current range, the data will be marked as
"overload".
 When the relative value operation is enabled, the recorded data is still the reading
when the relative value is closed.
3. Clear the manual record: Press the Clear softkey to clear all data in the data table.
(Note: because manual and automatic records share the same data table, automatic
readings are also erased.).
Auto Record
1. Configure the parameters: Press the front panel key, press the Auto softkey.
Press the Point softkey to specify the total number of readings to record. The range is
1 to 1000.