Operation Manual

WWW.MANUALS.WS
WWW.MANUALS.WS
1979 Volvo 242 244 245
Replacing sealed beam headlamp units 244, 245 DL (and 244 GL, Canada)
1. Press the two plastic screws down and turn them 1/4 turn and remove them.
2. Lift up the rim slightly and remove it forwards.
3. Remove clip and ring. Lift out the headlamp unit.
4. Disconnect the socket contact.
Installation is done in the opposite way.
Check that chromed ring is retained by all four clips.
Check headlight alignment.
pg. 62 Replacing bulbs
Replacing sealed beam headlamp units (242 DL and 242 GT)
1. Press the two plastic screws down and turn them 1/4 turn and remove them.
2. Lift up the rim slightly and remove it forwards.
3. Turn the chromed ring slightly counterclockwise. Remove the chromed ring and lift out the headlamp
unit.
4. Disconnect the socket contact.
file:///K|/ownersdocs/1979/1979_242_244_245/79242244245_03b.htm (8 of 22)12/22/2006 10:24:31 PM