Specifications

1979 Volvo 264 265
Remove screw holding the light assembly. Lift out and to the right to remove.
Replace the bulb.
Reinstall by first inserting the guides into the left side, then press in the light assembly and install screw.
Bulbs Power Socket
Trunk light,
264
15 W S 8.5
pg. 64 Replacing bulbs
License plate light, 264
Insert a screwdriver as shown and carefully pry loose the lamp housing. Take care not to damage the
paint. Pull out the lamp housing and replace the bulb. Insert the front edge of the lamp housing and press
up the rear edge by hand.
Bulbs Power Socket
License plate light, 264 4W Ba 9s
file:///K|/ownersdocs/1979/1979_264_265/79264265_03b.htm (12 of 20)12/22/2006 10:25:29 PM