Operation Manual

||
09 Itinerary
09
52
Select method to determine/search for an
intermediate destination from the menu
Set
destination and add up to 4 intermediate
destinations.
The first specified/saved destination is the
journey's Final destination - subsequent input
destinations are then Intermediate destina-
tions.
NOTE
The last added destination will always be
Waypoint-1 - the previous Waypoint is
raised one step: "Old" Waypoint 1
becomes Waypoint 2, etc.
The reciprocal order of the intermediate desti-
nations can easily be adjusted afterwards -
see point
Move in list (p. 52).
Related information
Intermediate destinations in the itinerary
(p. 52)
Intermediate destinations in the
itinerary
Intermediate destinations/intermediate stops
in an itinerary can be adjusted and/or
replaced.
Highlight an intermediate destination + OK to
perform the following with each respective
intermediate destination:
Information - e.g. name and address.
Delete - deletes the intermediate desti-
nation.
Move in list - changes order in the itiner-
ary (see next heading).
Save - saves the intermediate destina-
tion.
Move in list
To change the order between the intermedi-
ate destinations - proceed as follows:
1. Highlight the intermediate destination to
be moved + OK - a pop-up menu is
shown
2.
Highlight
Move in list + OK
3. Turn TUNE - the intermediate destination
is moved up/down in the list
4. Finish with OK to confirm the move.
Delete itinerary
Cursor on Clear itinerary + OK deletes the
current itinerary including all intermediate
destinations.
Related information
Itinerary - general (p. 51)
Map of the remaining route (p. 56)