Owner’s Manual

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.
117
Trip computer – Trip statistics
Trip information from previous trips regarding
average fuel consumption and average speed is
stored and can be displayed in the form of a bar
chart.
Function
Trip statistics
27
Each bar represents a driving distance of 1 mile
or 10 miles, depending on the current scale; the
bar at the far right shows the value for the cur-
rent mile/10 miles.
Use TUNE to change between 1 mile and
10 miles; the marker at the right will also change
according to the scale selected.
Settings
Settings can be made in the MY CAR menu sys-
tem as follows:
MY CAR My S60 Trip statistics:
•
Start new trip: press ENTER to erase all
pervious statistics. Exit the menu by pressing
EXIT.
•
Reset for every driving cycle: select by
pressing ENTER. Exit the menu by pressing
EXIT.
Selecting
Reset for every driving cycle erases
all trip statistics automatically if the ignition is
switched off for at least 4 hours. When the
engine is restarted, new statistics will be stored.
To get new statistics if the engine is restarted
before 4 hours have elapsed, the existing ones
have to be erased manually by selecting Start
new trip.
For additional information, see Information display
– menu controls (p. 108).
See also the information about Eco Guide in Eco
Guide* and Power Meter* (p. 66).
Related information
•
Trip computer – introduction (p. 110)
•
Trip computer – functions, analog instrument
panel (p. 111)
•
Trip computer – functions, digital instrument
panel (p. 114)
•
Trip computer – Supplementary information
(p. 116)
27
The illustration is generic; certain details may vary from model to model